Description
Point-to-Point Measurements are for reference only. Allmeasurements are given in millimeters. Use these measurements fordiagnosis and estimating. Point-to-Point measurements areduplicated with tram bar pointers set at equal lengths. All diemarks, holes, slots and fasteners are measured to the center. Alldimensions are symmetrical unless otherwise specified.
Under Hood Opening Dimensions._Body Side Opening Dimensions (Equinox)
Rear Body Dimensions
Tire-to-Wheel Match-Mounting (Vectoring) Wheels
Note:After remounting a tire to a wheel or after replacing a tireand/or a wheel, remeasure the tire and wheel assembly runout inorder to verify that the amount of runout has been reduced andbrought to within tolerances. Ensure that the tire and wheelassembly is properly balanced before reinstalling ...