Chevrolet Equinox Owners Manual: Cruise Control
: Press to turn the cruise
control
system on and off. A white indicator
comes on in the instrument cluster
when cruise is turned on.
: Press to disengage cruise
control without erasing the set
speed from memory.
+RES : If there is a set speed in memory, press to resume that speed or press and hold to accelerate. If cruise control is already active, use to increase vehicle speed.
−SET : Press briefly to set the speed and activate cruise control.
If cruise control is already active, use to decrease vehicle speed.
See Cruise Control.
Steering Wheel Controls
If equipped, some audio controls
can be adjusted at the steering
wheel.
: For vehicles with OnStar or a
Bluetooth system, press to interact
with those systems.
See OnStar Overview or
B ...
Driver Information Center (DIC)
The DIC display is in the instrument
cluster. It shows the status of many
vehicle systems
or
: Press to move up or
down in a list.
or
: Press to move between
the interactive display ...
Other materials:
Water Pump and Balance Shaft Chain and Tensioner Installation Engine Block Cylinder Block Balance Shaft
Caution:Refer toFastener Caution.Note:If the balance shafts are not properly timed to the engine,the engine may vibrate and make noise.Install the upper balance shaft chain guide-(1)and bolts and tighten to12-Y-(106-lb-in).Install the small balance shaft chainguide-(1).Install the balance shaft chai ...
