Chevrolet Equinox Service Manual: Crankshaft Balancer Replacement Engine Block Cylinder Block Crankshaft
Special ToolsEN-45059 Angle MeterEN-38122-A Harmonic Balancer Holder
For equivalent regional tools, refer toSpecial Tools.
Removal Procedure
Remove the drive belt. Refer toDrive Belt Replacement.Use EN-38122-A holder(1) to prevent the crankshaft from rotating while loosening the crankshaft balancerbolt (2).Remove and discard the crankshaft balancer bolt.
Remove the bolt (1), washer (2), and crankshaft balancer-(3).Installation Procedure
Position the crankshaft balancer (3) .Install washer (2) and a NEW crankshaft balancer bolt-(1).
Use the EN-38122-A holder(1) to hold the crankshaft balancer in order to prevent the balancer from rotatingwhile tightening the bolt (2) .
Caution:Refer toFastener Caution.
Tighten the crankshaft balancer bolt to 150-Y (111-lb-ft) plus an additional 100 degrees using the EN-45059 meter.Install the drive belt. Refer toDrive Belt Replacement.
Timing Chain Tensioner Replacement Valvetrain Valvetrain Timing Timing Belt Tensioner
Special ToolsEN-45027Tensioner ToolFor equivalent regional tools, refer toSpecial Tools.Removal ProcedureDisconnect the negative battery cable. Refer toBattery Negative Cable Disconnection and Connect ...
Camshaft Position Intake Actuator Replacement Valvetrain Camshaft
Special ToolsEN-45059Angle MeterEN-48749Timing Chain Retention Tool KitEN-48953Camshaft Actuator Locking ToolFor equivalent regional tools, refer toSpecial Tools.Removal ProcedureRemove the air cleane ...
Other materials:
Braking
Braking action involves perception
time and reaction time. Deciding to
push the brake pedal is perception
time. Actually doing it is
reaction time.
Average driver reaction time is
about three-quarters of a second. In
that time, a vehicle moving at
100 km/h (60 mph) travels 20m
(66 ft), wh ...
