
Caution:After cleaning the transmission components, allow to air dry.Do not use cloth or paper towels in order to dry any transmissioncomponents. Lint from the towels can cause componentfailure. Caution:Do not reuse cleaning solvents. Previously used solvents maydeposit sediment which may damage the component. | |
1 | Control Valve Body Spacer Plate Retainer-(Qty: 2) |
2 | Control Valve Upper Body Spacer Plate Assembly |
3 | Actuator Feed Accumulator Spring-(Qty: 3) |
4 | Actuator Feed Accumulator Piston-(Qty: 3) |
5 | Control Valve Body Locating Pin-(Qty: 2) Note:Inspect locating pins for proper installed height of 4.25-mm (0.17-in). |
Control Valve Body Spacer Plate Assembly - Case Side Automatic Transmission Unit
Control Valve Channel Plate - Upper Body Spacer Plate Side Automatic Transmission UnitBody Side Trim Panel Replacement - Left Side Trim Panels/Welts
Body Side Trim Panel Replacement - Left SideCalloutComponent NamePreliminary ProceduresMove the rear seat to the full forward position.Remove the rear compartment front carpet opening cover bypulling upward to disengage the integral hook and loopfasteners.Remove the rear end trim finish panel. Refer ...