Use only lukewarm or cold water, a soft cloth, and a car washing soap to clean exterior lamps, lenses, emblems, decals, and stripes.
Follow instructions under "Washing the Vehicle" previously in this section.
Lamp covers are made of plastic, and some have a UV protective coating. Do not clean or wipe them when dry.
Do not use any of the following on lamp covers:
| Caution Failure to clean lamps properly can cause damage to the lamp cover that would not be covered by the vehicle warranty. |
| Caution Using wax on low gloss black finish stripes can increase the gloss level and create a non-uniform finish. Clean low gloss stripes with soap and water only. |
Air Intakes
Clear debris from the air intakes, between the hood and windshield, when washing the vehicle.
Protecting Exterior Bright Metal
Moldings
Shutter SystemFluid Pump Cover - Fluid Pump Body Side Automatic Transmission Unit
Fluid Pump Cover-–-FluidPump Body Side(1)Suction(2)Line(4)Converter Feed(5)TCC Release(6)TCC Apply(7)Cooler Feed(9)Regulated Apply(12)PCS Line(34)PCS TCC ...