Preliminary Procedure Remove the engine mount bracket. Refer toEngine Mount Bracket Replacement - Right Side. | |
1 | Camshaft Position Actuator Solenoid Valve Fastener Caution:Refer toFastener Caution. Procedure Disconnect the electrical connector. Tighten10-Y(89-lb-in) |
2 | Camshaft Position Actuator Solenoid Valve |
Tire and Wheel Assembly Runout Measurement - On-Vehicle
Raise and support the vehicle.Closely inspect each tire for proper and even beadseating.If any of the tire beads were not properly or evenly seated,reseat the tire bead, then proceed to step-4. Refer toTire and Wheel Removal and Installation.Wrap the circumference of each tire with tape-(1)in the ce ...