Chevrolet Equinox Owners Manual: Brake Assist
The Brake Assist feature is designed to assist the driver in stopping or decreasing vehicle speed in emergency driving conditions. This feature uses the stability system hydraulic brake control module to supplement the power brake system under conditions where the driver has quickly and forcefully applied the brake pedal in an attempt to quickly stop or slow down the vehicle. The stability system hydraulic brake control module increases brake pressure at each corner of the vehicle until the ABS activates.
Minor brake pedal pulsation or pedal movement during this time is normal and the driver should continue to apply the brake pedal as the driving situation dictates. The Brake Assist feature will automatically disengage when the brake pedal is released or brake pedal pressure is quickly decreased.
EPB Release
To release the EPB:
Turn the ignition on, or to ACC/
ACCESSORY.
Apply and hold the brake
pedal.
Press the EPB switch
momentarily.
The EPB is released when the
or PA ...
Hill Start Assist (HSA)
This vehicle has a Hill Start Assist
(HSA) feature, which may be useful
when the vehicle is stopped on a
grade sufficient enough to activate
HSA. This feature is designed to
prevent the vehicle f ...
Other materials:
Ignition Coil Replacement Engine Control
Removal ProcedureRemove the intake manifold cover. Refer toIntake Manifold Cover Replacement.Disconnect the engine wiring harness electricalconnectors-(1) from the ignitioncoil(s)-(2).Remove the ignition coil bolt(s).Remove the ignition coil(s).Installation ProcedureInstall the ignition coil(s).Caut ...
