Chevrolet Equinox Service Manual: Body Control Module Replacement Body Control Modules

Chevrolet Equinox Service Manual / Electrical / Data and Communication Network / Body Control Module Replacement Body Control Modules

Body Control Module Replacement Body Control Modules

Body Control Module Replacement

Callout

Component Name

Preliminary ProcedureRemove the drivers side insulator panel. Refer toInstrument Panel Insulator Panel Replacement - Left SideRemove the driver knee bolster reinforcement. Refer toDriver Knee Bolster Reinforcement Replacement
1	Body Control Module ProcedureDisconnect the electrical connectors.Depress the tab on the bracket and slide the moduleforward.Reprogram the module if replaced. Refer toControl Module References.

Data and Communication Network

...

Data Link Communications Description and Operation

Note:This is an overview of different serial data buses used by GM devices to communicatewith each others. UseData Communication Schematicsto find out which serial data buses are configured for a spec ...

Other materials:

Repairing Damaged Wire Insulation Trim Panels/Welts
If the wire insulation has been chafed, or broken, enough to show the conductive portionof the wire, and the wire is not damaged, determine the length of insulation thatneeds to be repaired. If the repair is less than 280-mm (11-in), cut the wire withinthe damaged area. Then slide the appropriate he ...