Preliminary ProcedureDisconnect the negative battery cable. Refer toBattery Negative Cable Disconnection and Connection.Reposition the engine control module bracket/battery hold-down retainer. Refer toEngine Control Module Replacement.Remove the positive battery cable from the battery post. Refer toBattery Positive Cable ReplacementRemove the push in retainers from the front portion of the left front bumper fasciaopening cover and reposition the cover. Refer toFront Bumper Fascia Opening Cover Replacement. | |
1 | Battery Cover |
2 | Engine Control Module Bracket Bolt Caution:Refer toFastener Caution. Tighten9-Y (80-lb-in) |
3 | Engine Control Module |
4 | Battery Retainer Bracket Bolt Tighten9-Y (80-lb-in) |
5 | Battery Retainer Bracket Nut Tighten9-Y (80-lb-in) |
6 | Battery |
Crankshaft and Bearing Removal Engine Block Cylinder Block Crankshaft
Special ToolsGE 6125-1BSlide Hammer AdapterEN 49102Crankshaft Bearing Cap RemoverFor equivalent regional tools, refer toSpecial Tools.Crankshaft End Play MeasurementPlace a dial indicator at the crankshaft nose.Gently force the crankshaft to the extreme front and rearpositions with a pry tool while ...