Warning:When you are doing this inspection, the vehicle could movesuddenly. If the vehicle moves, you or others could beinjured.
Before starting this check, be sure there is enough room around the vehicle. It shouldbe parked on a level surface.Apply the parking brake. Be ready to apply the regular brake immediately if the vehiclebegins to move.With the engine off, turn the ignition on, but do not start the engine. Without applyingthe regular brake, try to move the shift lever out of P-(Park) with normal effort.If the shift lever moves out of P-(Park), contact your dealer for service.
Fuel Pressure Relief Engine Control
DrivelineCrankshaft Rear Oil Seal Installation Engine Block Seals and Gaskets
Special ToolsEN-42067Rear Main Seal InstallerFor equivalent regional tools, refer toSpecial Tools.Remove excess sealer from seal recess.Lubricate the outside diameter of the new crankshaft sealwith clean engine oil.Using theEN-42067installer-(1), press the new crankshaft seal into thehousing. TheEN- ...