This light shows if there is an electrical problem with the airbag system. The system check includes the airbag sensor(s), the passenger sensing system, the pretensioners, the airbag modules, the wiring, and the crash sensing and diagnostic module. For more information on the airbag system, see Airbag System.
The airbag readiness light comes on for several seconds when the vehicle is started. If the light does not come on then, have it fixed immediately.
Warning If the airbag readiness light stays on after the vehicle is started or comes on while driving, it means the airbag system might not be working properly. The airbags in the vehicle might not inflate in a crash, or they could even inflate without a crash. To help avoid injury, have the vehicle serviced right away. |
If there is a problem with the airbag system, a Driver Information Center (DIC) message may also come on.
Manual Shift Shaft Seal Removal Automatic Transmission Unit
Manual Shift Shaft Seal RemovalCalloutComponent Name1Manual Shift Shaft SealNote:Use the DT-45201 seal remover to remove the seal to prevent damage to the case surface.Special Tools DT-45201 Seal RemoverFor equivalent regional tools, refer toSpecial Tools. ...