Removal Procedure
Remove the seal washer from the A/C refrigerantcomponent.Inspect the seal washer for any signs of damage.Inspect the A/C refrigerant components for damage or burrs.Repair or replace as necessary.
Note:DO NOT reuse sealing washer.
Discard the sealing washer.Installation ProcedureNote:Flat washer type seals do not require lubrication.
Inspect the new seal washer for any signs of cracks, cuts, ordamage.Do not use a damaged seal washer.
Using a lint-free clean, dry cloth, clean the sealingsurfaces of the A/C refrigerant components.Carefully install the new seal washer onto the A/Crefrigerant component.The washer must completely bottom against the surface of thefitting.
Note:After tightening the A/C components, there should be a slightsealing washer gap of approximately 1.2-mm(3/64-in) between the A/C line and the A/Ccomponent.
Assemble the remaining A/C refrigerant components. Refer tothe appropriate repair procedure.Front Bumper Fascia Replacement (Terrain) Bumpers Front Bumper
Front Bumper Fascia ReplacementCalloutComponent NamePreliminary ProceduresRemove the front bumper fascia opening cover. Refer toFront Bumper Fascia Opening Cover Replacement.Remove the front wheelhouse liner. Refer toFront Wheelhouse Liner Replacement.1Front Bumper Fascia Screw (Qty:-4)Caution:Refer ...