Chevrolet Equinox Service Manual: 3-5-Reverse and 4-5-6 Clutch Housing, and Input, Reaction, and Output Carrier Installation Automatic Transmission Unit
1 | 3–5 Reverse and 4–5–6 Clutch Housing Thrust Bearing |
2 | 2–6 Clutch Apply Plate (Waved) |
3 | 2–6 Clutch Plate-(Qty:-1) Note: Only install one 2–6 Clutch Plate. The remaining clutch plate is installed with thegearset assembly.Align the large flat areas with the valve body end of the case and the 2 tabs on theclutch plate that are close to each other with the slots at the bottom right cornerof the case. |
4 | 3–5 Reverse and 4–5–6 Clutch Housing Assembly and Gearset Note:Align the large flat areas of the 2–6 Clutch Plate with the valve body end of thecase and the 2 tabs on the clutch plate that are close to each other with the slotsat the bottom right corner of the case. |
3-5-Reverse and 4-5-6 Clutch Fluid Seal Ring Replacement (Gen 2) Automatic Transmission Unit
3-5-Reverse and 4-5-6 Clutch Fluid Seal Ring ReplacementCalloutComponent NameSpecial ToolsDT-46620Seal InstallerFor equivalent regional tools, refer toSpecial Tools.13–5 Reverse and 4–5–6 Clutch ...
3-5-Reverse and 4-5-6 Clutch Housing Installation Automatic Transmission Unit
3-5-Reverse and 4-5-6 Clutch Housing InstallationCalloutComponent Name13–5 Reverse and 4–5–6 Clutch AssemblyNote:Rotate the assembly back and forth to align the 3–5 reverse clutch plates with ...
Other materials:
Primary Camshaft Intermediate Drive Chain Installation Valvetrain Camshaft
Note:Ensure that the crankshaft is in the stage one timing driveassembly position.Install the primary camshaft drive chain.Wrap the primary camshaft drive chain around the largesprockets of each camshaft intermediate drive chain idler and thecrankshaft sprocket.The left camshaft intermediate drive c ...
