Chevrolet Equinox manuals

Chevrolet Equinox Service Manual: 1-2-3-4 Clutch Plate and Low and Reverse Clutch Installation Automatic Transmission Unit Automatic Clutches

Chevrolet Equinox Service Manual / Powertrain / Transmission/Transaxle / 1-2-3-4 Clutch Plate and Low and Reverse Clutch Installation Automatic Transmission Unit Automatic Clutches

Table 1: Piston and Spring Installation
Table 2: 1-2-3-4 Clutch Plates and Low Reverse Clutch Installation
Table 3: Low and Reverse Clutch Plate Installation
Piston and Spring Installation

1-2-3-4 Clutch Plate and Low and Reverse Clutch Installation Automatic Transmission Unit Automatic Clutches

Piston and Spring Installation

Callout

Component Name

1

1-2-3-4 Clutch Piston

Note:DT-46623 seal protector prevents the piston seal lip from damage during installation. Apply a thin coat ofATF to the I.D. of DT-46623 seal protector to ease the installation of the piston.

Special Tools

DT-46623 Piston Seal Protector

For equivalent regional tools, refer toSpecial Tools.

2

1-2-3-4 Clutch Spring

3

1-2-3-4 Clutch Spring Retainer Ring

Caution:Refer toFastener Caution.

Procedure:The retainer opening should be supported by a spline tooth of the case.Install DT-46632 spring compressor and DT-48056 spring compressor bridge and retain to the case using 2-case cover assembly bolts.Turn the DT-48056 spring compressor bridge compressor bolt to compress the 1-2-3-4 Clutch Spring until the retaining ring grooveis exposed.Push retainer ring into the groove.Remove DT-48056 spring compressor bridge and DT-46632 spring compressor.Air check the piston operation by applying air to the 1-2-3-4 clutch feed passagein the case.Excessive air leaks indicate damage to the clutch piston seal.Tighten

12-Y (9-lb-ft).

Special ToolsDT-48056 Spring Compressor BridgeDT-46632 Piston Spring Compressor

For equivalent regional tools, refer toSpecial Tools.

1-2-3-4 Clutch Plates and Low Reverse Clutch Installation

1-2-3-4 Clutch Plate and Low and Reverse Clutch Installation Automatic Transmission Unit Automatic Clutches

1-2-3-4 Clutch Plates and Low Reverse Clutch Installation

Callout

Component Name

1

1-2-3-4 Clutch (Waved) Plate

Note:The tab on the clutch plate faces the bottom of the case.

2

1-2-3-4 Clutch Plate-(Qty:-2)

Note:The tab on the clutch plate faces the bottom of the case.

3

1-2-3-4 Clutch (w/Friction Material) Plate Assembly-(Qty:-2)

4

Low and Reverse Clutch Assembly

5

Low and Reverse Clutch Retaining Ring

Note:The tab needs to go in groove at about 2-o'clock and snap ring opening needs to face3-o'clock.

Low and Reverse Clutch Plate Installation

1-2-3-4 Clutch Plate and Low and Reverse Clutch Installation Automatic Transmission Unit Automatic Clutches

Low and Reverse Clutch Plate Installation

Callout

Component Name

1

Low and Reverse Clutch Backing Plate

Note:The tab on the clutch plate faces the bottom of the case.

2

Low and Reverse Clutch (w/Friction Material) Plate Assembly-(Qty:-4)

3

Low and Reverse Clutch Plate-(Qty:-3)

Note:The tab on the clutch plate faces the bottom of the case.

4

Low and Reverse Clutch Apply Plate

Note:The tab on the clutch plate faces the bottom of the case.

5

Low and Reverse Clutch Cushion (Waved) Spring

Note:The tab on the clutch plate faces the bottom of the case.

Manual Shift Detent Lever with Shaft Position Switch Assembly and Park Pawl Actuator Installation Automatic Transmission Unit
Table 1: Park Pawl Actuator Guide InstallationTable 2: Park Pawl Actuator InstallationPark Pawl Actuator Guide InstallationPark Pawl Actuator Guide InstallationCalloutComponent Name1Park Pawl Actuator ...

Torque Converter and Differential Housing Assembly Assemble Automatic Transmission Unit
Table 1: Pump Assembly InstallationTable 2: Transfer Drive Gear Assembly InstallationPump Assembly InstallationPump Assembly InstallationCalloutComponent Name1Driven Sprocket Thrust Washer2Drive Sproc ...

Other materials:

Jump Starting Starting System
For more information about the vehicle battery, seeBattery.Jump starting can be used on vehicles with run-down batteries by using jumper cablesand another vehicle.Warning:Batteries can hurt you. They can be dangerous because:They contain acid that can burn you.They contain gas that can explode or ig ...

© 2017-2024 Copyright www.cequinox.com