Chevrolet Equinox Owners Manual: Tire and Loading Information Label
Example Label
A vehicle-specific Tire and Loading Information label is attached to the center pillar (B-pillar). The tire and loading information label shows the number of occupant seating positions (1), and the maximum vehicle capacity weight (2) in kilograms and pounds.
The Tire and Loading Information label also shows the size of the original equipment tires (3) and the recommended cold tire inflation pressures (4).
For more information on tires and inflation see Tires and Tire Pressure.
There is also important loading information on the vehicle Certification/Tire label. It may show the Gross Vehicle Weight Rating (GVWR) and the Gross Axle Weight Rating (GAWR) for the front and rear axle. See "Certification/Tire Label" later in this section.
Vehicle Load Limits
It is very important to know how
much weight the vehicle can
carry. This weight is called the
vehicle capacity weight and
includes the weight of all
occupants, cargo, and all
nonfactory-installe ...
"Steps for Determining Correct
Load Limit-
Locate the statement "The
combined weight of
occupants and cargo should
never exceed XXX kg or
XXX lbs." on your vehicle's
placard.
Determine the combined
weight ...
Other materials:
Engine Mount Inspection Engine Block Engine Mounts
Note:Before replacing any engine mount due to suspected fluidloss, verify that the source of the fluid is the engine mount, notthe engine or accessories.Install the engine support fixture. Refer toEngine Support Fixture.Observe the engine mount while raising the engine. Raisingthe engine removes the ...
