
Carefully open the cover by using the small notch that conceals the front tow eye socket.

Install the tow eye into the socket by turning it clockwise until it stops in a horizontal position.
When the tow eye is removed, reinstall the cover with the notch in the original position.
Towing
Rear Tow EyeTire and Wheel Assembly Balancing - On-Vehicle
Special ToolsEL-38792-AElectronic Vibration Analyzer(EVA)-2If after following the tire and wheel vibration diagnosticprocess, some amount of tire and wheel vibration is still evident,an on-vehicle high-speed spin balancer may be used to perform anon-vehicle balance in an attempt to finish balance th ...