Chevrolet Equinox Owners Manual: EPB Apply
To apply the EPB:
- Be sure the vehicle is at a complete stop.
- Pull the switch momentarily.
The
or PARK light will flash and
then stay on once the EPB is fully
applied. If the
or PARK light
flashes continuously, then the EPB
is only partially applied or there is a
problem with the EPB. A DIC
message will display. Release the
EPB and try to apply it again. If the
light does not come on, or keeps
flashing, have the vehicle serviced.
Do not drive the vehicle if the
or
PARK light is flashing. See your
dealer. See Electric Parking Brake
Light.
If the 
light is on, pull the EPB
switch. Continue to hold the switch
until the
or PARK light remains
on. If the 
light remains on, see
your dealer.
If the EPB is applied while the vehicle is moving, the vehicle will decelerate as long as the switch is pulled. If the switch is held until the vehicle comes to a stop, the EPB will remain applied.
The EPB applies automatically when shifting to P (Park) on a steep incline. The EPB releases as soon as the vehicle is shifted out of P (Park) and the vehicle accelerates.
If the EPB fails to apply, the rear wheels should be blocked to prevent vehicle movement.
Electric Parking Brake
The Electric Parking Brake (EPB)
can always be activated, even if the
ignition is off. To prevent draining
the battery, avoid repeated cycles of
the EPB when the engine is not
running.
The ...
EPB Release
To release the EPB:
Turn the ignition on, or to ACC/
ACCESSORY.
Apply and hold the brake
pedal.
Press the EPB switch
momentarily.
The EPB is released when the
or PA ...
Other materials:
Front Floor Panel Carpet Replacement Floorlining and Carpets
Front Floor Panel Carpet ReplacementCalloutComponent NamePreliminary ProceduresRemove the front seats. Refer toDriver or Passenger Seat Removal and Installation.Remove the rear seats. Refer toRear Seat Removal and Installation.Remove the body hinge pillar trim panel. Refer toBody Hinge Pillar Trim P ...
