Chevrolet Equinox Service Manual: Case Cover and 3-5-Reverse and 4-5-6 Clutch Housing Removal Automatic Transmission Unit
1 | A/Trans Case Cover Assembly Bolt-M6-x-30-(Qty:-10) |
2 | A/Trans Case Cover Assembly Caution:Use care when pulling the input speed sensor wire harnessthrough the case to avoid damaging the harness. |
3 | A/Trans Case Cover Gasket Note:The gasket is not reusable. |
4 | Input Shaft Thrust Bearing Assembly Note:The bearing may be stuck to the case cover. |
5 | 3–5 Rev/4–5–6 Clutch Housing Assembly |
Case - Torque Converter and Differential Housing Side Automatic Transmission Unit
Case-–-Torque Converter andDifferential Housing Side(2)Line(7)Cooler Feed(8)Lube(9)Regulated Apply(10)Exhaust Backfill(12)PCS Line(21)35 Reverse Clutch(32)26 Clutch(33)456 Clutch(34)PCS TCC(38)Seal ...
Case Cover Assembly Installation Automatic Transmission Unit
Case Cover Assembly InstallationCalloutComponent Name1Input Shaft Thrust BearingNote:Note location of the orientation lip on bearing. All thrust bearings can only be assembledone way.2A/Trans Case Cov ...
Other materials:
Camshaft Position Actuator Removal - Right Side Intake Valvetrain Camshaft
Caution:Refer toTorque Reaction Against Timing Drive Chain Caution.Use an open wrench on the hex cast into the camshaft in orderto prevent engine rotation when loosening the camshaft positionactuator bolt.Remove the right intake camshaft position actuatorbolt-(1).Remove the right intake camshaft pos ...
