Chevrolet Equinox Service Manual: Water Outlet Installation Engine Cooling

Chevrolet Equinox Service Manual / Powertrain / Engine / Water Outlet Installation Engine Cooling

Water Outlet Installation Engine Cooling

Install the NEW water outlet seals-(3)and-(4).Install the water outlet-(2).

Caution:Refer toFastener Caution.

Install the water outlet bolts-(1) and tighten to10-Y(89-lb-in).

Secondary Air Injection Check Valve Installation - Bank 2 Emissions Air Injection

Install the NEW secondary air injection-(SAI)check valve gasket-(1).Install the SAI check valve-(2).Caution:Refer toFastener Caution.Install the SAI check valve bolts-(3) and tightento25-Y(18-lb-ft). ...

Intake and Exhaust Camshaft, Bearing Cap, and Lash Adjuster Removal (LAF, LEA, or LUK) Valvetrain Valve Actuating Assembly Valve Tappets/Lifters

Intake Camshaft and Components RemovalRemove the intake camshaft position actuator solenoid valvebolt-(1) and valve-(2).Remove the rear cylinder head coverplate-(1).Remove the intake camshaft bearing ...

Other materials:

Flushing Engine Cooling
Note:Do not use a chemical flush.Store used coolant in the proper manner, such as in a usedengine coolant holding tank. Do not pour used coolant down a drain.Ethylene glycol antifreeze is a very toxic chemical. Do not disposeof coolant into the sewer system or ground water. This is illegaland ecolog ...