Warning:When you are deploying an inflator module for disposal,perform the deployment procedures in the order listed. Failure tofollow the procedures in the order listed may result in personalinjury.
SIR Warning Secondary
MirrorsLower Control Arm Ball Joint Replacement Suspension Ball Joints
Removal ProcedureRemove the lower control arm. Refer toLower Control Arm Replacement.Place the lower control arm in a vise or suitable holding device.Remove the ball joint rivets using the following procedure.Drill through the rivets using an 8-mm (5/16-in) drill bit.Enlarge the hole using a 12-mm ( ...