Chevrolet Equinox manuals

Chevrolet Equinox Owners Manual: Passenger Airbag Status Indicator

The vehicle has a passenger sensing system. See Passenger Sensing System for important safety information. The overhead console has a passenger airbag status indicator.

United States and Canada
United States and Canada

Mexico
Mexico

When the vehicle is started, the passenger airbag status indicator will light ON and OFF, or the symbol for on and off, for several seconds as a system check. Then, after several more seconds, the status indicator will light either ON or OFF, or either the on or off symbol, to let you know the status of the front outboard passenger frontal airbag.

If the word ON or the on symbol is lit on the passenger airbag status indicator, it means that the front outboard passenger frontal airbag is allowed to inflate.

If the word OFF or the off symbol is lit on the passenger airbag status indicator, it means that the passenger sensing system has turned off the front outboard passenger frontal airbag.

If, after several seconds, both status indicator lights remain on, or if there are no lights at all, there may be a problem with the lights or the passenger sensing system. See your dealer for service.

Warning If the airbag readiness light ever comes on and stays on, it means that something may be wrong with the airbag system. To help avoid injury to yourself or others, have the vehicle serviced right away. See Airbag Readiness Light for more information, including important safety information.
Airbag Readiness Light
This light shows if there is an electrical problem with the airbag system. The system check includes the airbag sensor(s), the passenger sensing system, the pretensioners, the airbag modules, the ...

Charging System Light
The charging system light comes on briefly when the ignition is turned on, but the engine is not running, as a check to show the light is working. The light turns off when the engine is sta ...

Other materials:

Tire and Wheel Assembly Runout Measurement - On-Vehicle
Raise and support the vehicle.Closely inspect each tire for proper and even beadseating.If any of the tire beads were not properly or evenly seated,reseat the tire bead, then proceed to step-4. Refer toTire and Wheel Removal and Installation.Wrap the circumference of each tire with tape-(1)in the ce ...

© 2017-2019 Copyright www.cequinox.com