The exterior lamps turn off about 10 minutes after the ignition is turned off, if the parking lamps or headlamps have been manually left on. This protects against draining the battery. To restart the 10-minute timer, turn the exterior lamp control to the off position and then back to the parking lamp or headlamp position.
To keep the lamps on for more than 10 minutes, the ignition must be on or in ACC/ACCESSORY.
Battery Power ProtectionBalance Shaft Installation Engine Block Cylinder Block Balance Shaft
Note:This procedure is not used in Europe.Special Tools EN-43650 Balance Shaft Bushing Remover/InstallerFor equivalent regional tools, refer toSpecial Tools.Install the balance shaft bushing using the EN-43650 installer-(1).Seat the balance shaft bushing into the bore using the EN-43650 installer-(1 ...