Chevrolet Equinox Service Manual: Engine Oil Pressure Sensor and/or Switch Replacement Engine Lubrication

Chevrolet Equinox Service Manual / Powertrain / Engine / Engine Oil Pressure Sensor and/or Switch Replacement Engine Lubrication

Engine Oil Pressure Sensor and/or Switch Replacement Engine Lubrication

Engine Oil Pressure Sensor and/or Switch Replacement

Callout

Component Name

Preliminary Procedure

Remove the generator. Refer toGenerator Replacement.

Engine Oil Pressure Sensor and/or Switch

Caution:Refer toComponent Fastener Tightening Caution.

ProcedureDisconnect the oil pressure sensor electricalconnector.Transfer components as necessary.Tighten

20-Y(15-lb-ft)

Special Tools

EN-41712Oil Pressure Switch Socket

For equivalent regional tools, refer toSpecial Tools.

Engine Mount Replacement - Right Side Engine Block Engine Mounts

Engine Mount Replacement - Right SideCalloutComponent NamePreliminary ProceduresRemove the air cleaner assembly. Refer toAir Cleaner Assembly Replacement.Install engine support fixture. Refer toEngine ...

Engine Oil Pressure Switch Replacement

Engine Oil Pressure Switch ReplacementCalloutComponent NamePreliminary ProcedureRemove the starter. Refer toStarter Replacement.1Oil Pressure SwitchCaution:Refer toFastener Caution.ProcedureDisconnect ...

Other materials:

Neutral - Engine Running Automatic Transmission Unit
When the gear selector is moved to the Neutral (N) position, the hydraulic and electricalsystem operation is identical to Park (P) range. However, if Neutral is selected afterthe vehicle was operating in Reverse (R), the normally high 35R pressure control solenoid2 is commanded OFF and the following ...